Sexy Fast Rare and It Could Be Yours!

I have an authentic Noble M400 supercar that is one of the coolest vehicles I have ever owned. This is NOT a kit car but a authentic Noble with chassis number. Only about 300 in the states. It is a 2006. It has a AZ vin number so registration is no issue. I have the title in hand. Only 5100 miles. $67500 or best offer.

Noble is a British car company that has created these amazing cars featuring a Ford Cosworth V6 that is twin turbo. The is rated to 425hp and only weighs about 2400lbs. The exterior is red with gunmetal wheels and has a carbon fiber wing that is adjustable. Inside is all gray alcantara with a diamond stitch roof liner and alcantara wrapped full roll bar that you would not notice as it is stock. The bucket seats are comfortable and has both Willans 4pt harnesses and a regular seat belt. The 6speed gearbox is easy to drive and firm clutch pedal is amazing. With no traction control, when boost hits, get ready for an awesome ride!

Super cold functioning AC is standard. Car has a factory security system. Added 8000k HID lights. The car has a stereo system with iPod iPhone cable as well as Sirius satellite radio. Behind the driver is a 10″ subwoofer and behind the passenger is the amp. Everything runs and works like a dream!

I have gone through the entire car to make sure it is in perfect condition and running order. This car can be daily driven as the suspension is quite impressive. These are amazing track cars from videos I have seen and read online. However this has never seen that use.

If interested in this vehicle please send me an email (dan@vividracing.com) with your questions or call Dan 4809663040 x222.

Read an amazing article on this car here – http://www.roadandtrack.com/car-reviews/first-drives/no-bull-noble

Vehicle Specs:
The Noble M400 features a mid-mounted transverse engine design. The power plant began life as a 2,968 cc DOHC Ford Duratec V6 with four valves per cylinder, as used in the Ford Mondeo ST220. With this engine as a base, Noble fits high-lift camshafts, revised fuel injection, and two turbochargers.

For durability, Noble also added forged pistons, an oil cooler, a larger baffled oil sump, and extra cooling ducts. Its engine has a maximum power of 425 bhp (317 kW) at 6,500 rpm, with a torque figure of 390 lb·ft (530 N·m) at 5,000 rpm.[6] This power and a light weight allow the M400 to achieve a power-to-weight ratio of just over 400 bhp/ton, the figure for which it was named, a 0–60 mph (97 km/h) of 3.2 seconds and a 1/4-mile time of 11.4 @ 119.8 mph (192.8 km/h).[7][3] Top speed is 187 mph (301 km/h). The UK automotive TV show Vroom Vroom suggested that the M400 gave Ferrari Enzo performance at a Porsche 911 price.

Sexy Fast Rare and It Could Be Yours!

The Best Nissan 370Z Exhaust Sound - That Just Happened

Vivid Racing has just hit you with the best sounding Nissan 370Z exhaust ever from Agency Power.  In our continuation to put out some of the best quality and produced video, we present you with our all new Vivid Racing Video with a Nissan 370Z.  Your video comments continually say no more dub step music… So we granted you a temporary pass !  Here is all the engine and exhaust noise you need.  Accelerating, drifting, donuts, we take this rev matching, paddle shifting, Nissan 370Z for what is the best could mins ever.  Dyno tested, if you have a Nissan 370Z, you want this exhaust.  Check out more at www.vividracing.com/370z.

The Best Nissan 370Z Exhaust Sound - That Just Happened

Exotic Ferrari, X6 and M5"s straight from Saudi Arabia"s PP-Performance

It’s cool having connection with people all over the world who have the same fanaticism about cars as we do. We hope to one day go and drive a car in every country that we sell parts in. Saudi is a beautiful place that has vast wealth and the cars to show it. One of our dealers was nice enough to send us pictures of his shop and the layout he has setup. Having sweet toys around all the time is just a perk of the car business but PP Performance is on another level of swag, they’ve got everything from Ferrari’s to mini’s.  Check out their setup here. Shout out to our sales guy Ahmed (ahmed@vividracing.com ext: 231) and the people at PP-Performance for hooking us up with these pictures.

This first M5 is outfitted with some of our carbon products and there’s an x6 with an Akrapovic Titanium Tip Exhaust. Which of PP Performance cars is your favorite? Let us know on Facebook, Twitter or Instagram @vividracing.com

 

 

 

 

 

Exotic Ferrari, X6 and M5"s straight from Saudi Arabia"s PP-Performance

Aggressive Matte Bronze Work Meister Outfit this 300zx

The 300ZX is known to most as one of the first and most luxurious model of the Nissan Z. The X defines it as, not only performance car, but the luxury of this car goes beyond other performance vehicles of it’s day. The Nissan ZX holds records like, winning the 1986 Trans Am, it holds the land speed record 260.87 mph in the 1991 Bonneville Speed Trial, and of course won the 1994 24 Hours of Daytona.  The 300zx was Nissan breakout car in the performance market and started Nissan’s reign in the tuner market. Having a piece of history like this is a honor of its own. Our customer knows that having a car like this is enough to get attention, but he wanted something that warrants attention,so he decided to upgrade his piece of history with some Work Meister CR 01 in the matte Bronze. The bronze gives it that distinctive contrasts  and a more aggressive look. What you think of the wheel choice? Tell us on Facebook, Twitter or Instagram @vividracing.

 

Aggressive Matte Bronze Work Meister Outfit this 300zx

Work Wheels XD9 Perfect Fitment on this Nissan

Way back when, Nissan was referred to as Datsun. This is where the Nissan Maxima started out as the Datsun 810 in 1977. Once the 21st century hit and the world realized that 1980 and 1990 designs were terrible, Nissan stepped up its game across its line up. The 4 door Nissan Maxima was redone in 2000 featuring a VQ30DE V6 engine. What you thought would be mom’s car at the time, is now not a bad machine to make into a VIP starter kit. This customer of ours took his Maxima and began a new project with it. With some obvious basics, he really put his money in a great spot with these Work XD9 Wheels. Work Wheels, one of Japan’s premier wheel line is full of unique designs, perfectly stanced fitments, and still carrying on the “JDM” movement. The XD9 is an aggressive 9 spoke design featuring a deep lip and made as a high pressure cast aluminium design.

View all the highly desired Work Wheels from Japan here.

Work Wheels XD9 Perfect Fitment on this Nissan

Matte Green EVO X with Rare FQ400 UK Front Bumper

Here is definitely something unique and don’t see everyday state side. This customers matte green Mitsubishi EVO X has been equipped by us with this super rare FQ400 front bumper. The FQ400 was a limited edition Mitsubishi EVO X in the UK that was released with 400HP. With a 5speed transmission, this EVO had upgraded 6piston front brakes and 4piston rears. With 18″ wheels and special Toyo Tires R1R track rubber, this special EVO X did 0-60 in 3.8 seconds. With the same body and style, our customer had us get him this FQ400 front bumper for his US spec EVO. With enhanced styling and built in cooling ducts, this OEM quality front bumper just added to the already insane stance and style of this Mitsubishi EVO. Check out all our Mitsubishi EVO X Body Kits here.

Matte Green EVO X with Rare FQ400 UK Front Bumper

Seating for the Off-Roading Racer

Corbeau specializes in building seats that can withstand off-road tracks or the obstacles of the less traveled outdoors. If you’re into Jeeping, these are the seats for you. They offer exactly what you’re looking for in an off-road seat. Based in Utah, these guys know how to off-road. Their inspiration for the seats came from wanting to be comfortable and safe in wherever environment they were racing through.  We’re going to give you a quick run through of the different seat lines Corbeau offers.

Corbeau A4 Reclinable

The A4 is Corbeau’s reclinable seat. It is good for tighter spaces and will offer the comfort you need on the street, track or off-road. The A4 usually fits a 34 inch waist, but they also have an A4 wide version available for those us who are a medium “husky” build. You can get your A4 in a mixture of Cloth, Leather and Micro suede  they also have various colors to fix the personality of your ride. See more about these seats here. 

 

Corbeau Fixed Back, Bucket Seat

Corbeau offers a couple FIA approved versions of this particular line of seat.

• Classic
•  Classic II
• FIA Pro Series
• Sprint FIA
• FX 1 Pro
• Corbeau Forza

All of these models are compatible with a 4, 5, and or 6 point harness. If you’re really dedicated and want to have the racing feeling while you’re sitting at work, Corbeau’s got you. Their Corbeau office chair is exactly what you’re looking for. You can now day-dream of off-roading and be in the same seat, that’s in your car. 

 

Corbeau Off-Road Seats

This is where Corbeau excels, their off-road chairs are exactly what your weekend warrior is missing. You can custom fit your ride with any mixture of vinyl or cloth. The off-road seats comes in low or high back, and with or without the headrest, depending on your preference. Some of their Baja seats also offer a wide fitment. To browse all that Corbeau has to offer your off-road racer click here.

• The Baja JP Suspension
• Baja RS Suspension
• Baja SS Suspension
• Baja Ultra Suspension
• Baja XP Suspension
• Baja XRS Suspensio
•  Baja Low Back Suspension

Corbeau Rhino Seats

The RXP Yamaha Rhino Seat is a direct bolt-in, front replacement, seat for your Yamaha Rhino. The RXP Yamaha Rhino Suspension Seat was designed for those who want the safety of suspension and the comfort of Corbeau. As a rule of thumb the RXP Seat will fit up to a 38-40 inch waist, but it is subjective to how you like your seat to feel. We’ve seen people who have a 40 inch waist and feel fine. While others who have a  38 inch waist and don’t like the fitment. It just depends on how you like to ride. The RXP Yamaha Rhino Suspension Seat is available in all vinyl and vinyl/cloth fabrics. Corbeau also has seat covers available for purchase, so you can keep your new seat in good shape while tearin up the track. The RXP Rhino Suspension come in a low or high back and with or without a head rest.

Corbeau Bench Seats

Corbeau makes it easy for you to have safety and comfort, no matter what off-road vehicle you’re rockin’. Corbeau makes brackets for their bench seats, but then also custom makes a bracket adapter, so even if you don’t have the traditional fitment, Corbeau Baja Bench Seats are still a possibility for you. The other version of the bench seat is the Safari. It comes in two fitting colors, spice and tan for that down-under feel. These are a great way to easily upgrade your Jeep’s interior. The Safari Jeep Seat is a rear fold and tumble seat designed as a direct bolt-in to CJ and YJ Jeeps and will match the Corbeau Moab front seats. They can also match other stock fabrics.

Baja 36 in

Baja 40 in

Baja 42 in

Safari

Corbeau offer harnesses, Jeep and Mustang seat covers and seat accessories for all of their products. Here’s a video on some of the accessories they offer.

Seating for the Off-Roading Racer