Showing posts with label f10. Show all posts
Showing posts with label f10. Show all posts

Thursday, February 18, 2016

Akrapovic Exhaust System for the BMW M5 (F10)

Akrapovic exhaust systems are developed by the same team of engineers who work with championship-winning partner racing teams. So you can rest assured that both you and your vehicle will be in great hands when purchasing and installing one of their performance products.


Titanium exhaust systems for the BMW M5 (F10) are now available. Designed and tested to enhance responsiveness, performance and style, these systems are sure to unleash the power of the beast. Take a browse through our large selection of Akrapovic parts and systems here.


Akrapovic Exhaust System for the BMW M5 (F10)


After adding a full titanium exhaust system, you’ll never want to go back. The Akrapovic exhaust is made from proprietary titanium and consists of dual-outlet mufflers with exhaust valves, flow-optimized pipes, and a unique cast X-shaped part with resonators.


Akrapovic Exhaust System for the BMW M5 (F10)


This system lowers the back pressure and gives the M5 more power without removing the catalytic converters. The result is increased responsiveness and weight reduction (-23lbs). The sound of your vehicle will improve too, with a deep sporty sound that grows to an aggressive roar when driven hard. The plus side is that there will be no droning.


Akrapovic Exhaust System for the BMW M5 (F10)


Complete the look with a set of four exquisite tailpipes in titanium or carbon fiber. Choose what’s right for your style.


Akrapovic Exhaust System for the BMW M5 (F10)


Akrapovic Exhaust System for the BMW M5 (F10)


 



Akrapovic Exhaust System for the BMW M5 (F10)

Wednesday, December 16, 2015

aFe Scorcher Module Adds an Additional 60+HP to the BMW F10 M5!

aFe Power has introduced their new brand new Scorcher Tuning Module for the 2012-2016 BMW F10 M5 with the V8-4.4L twin Turbo Engine. The Module works by altering the pressure sensor signals to increase boost to an optimum level throughout the entire RPM range. This results in increased performance, throttle response and reduced turbo lag. As tested and verified by aFe on their in house dyno, this module added an extra 60+ Horsepower and +85 lbs ft of torque! The Scorcher Module is a direct plug and play unit that can be installed simply in 5 minutes. It utilizes OE style “all weather” connectors with automotive grade TXL high heat and chemical resistant wire.


Also fits the 2012-2016 BMW M6 (F12/13) V8-4.4L twin turbo engine and 2013-2016 BMW M6 (F06) Gran Coupe V8-4.4L twin turbo engine.


The aFe Scorcher Module is available for pre-order now and will be available in January!


If you have questions or would like to pre-order please contact a Vivid Racing Sales Specialist today by calling 1-866-448-4843


 


aFe Scorcher tuning Module BMW F10 M5



aFe Scorcher Module Adds an Additional 60+HP to the BMW F10 M5!

Wednesday, October 14, 2015

Fresh Fitment BMW F10 M5 with Vorsteiner V-FF 103 Wheels

Our customer Julio got hooked up with a fresh set of Vorsteiner V-FF 103 wheels for his BMW F10 M5.  The 21 inch Flow Forged setup has been finished in Carbon Graphite.  The wheels were wrapped by us with a set of Michelin Pilot Super Sport tires in a 255/30/21 and a 305/25/21.  The M5 has already been lowered on H&R springs which give it a stunning stance and functional ride.  The Flow Forged wheels are a combination process of a forging and casting to create a very strong, lightweight, and affordable wheel.  20 inch Vorsteiner wheels start as low as $2400 a set!  Check out all the Vorsteiner Flow Forged Wheels Here.


Julio-f10-m5-vorsteiner-wheels-1Julio-f10-m5-vorsteiner-wheels-2Julio-f10-m5-vorsteiner-wheels-3Julio-f10-m5-vorsteiner-wheels-4Julio-f10-m5-vorsteiner-wheels-5Julio-f10-m5-vorsteiner-wheels-6Julio-f10-m5-vorsteiner-wheels-7Julio-f10-m5-vorsteiner-wheels-8Julio-f10-m5-vorsteiner-wheels-9Julio-f10-m5-vorsteiner-wheels-10



Fresh Fitment BMW F10 M5 with Vorsteiner V-FF 103 Wheels

Tuesday, January 29, 2013

Project BMW M5 F10 Photoshoot with Sneak Peak of Full Titanium Exhaust

We have been quiet here while still doing some more work on our Project Cars.  Most recently, we took our SEMA built BMW M5 F10 out for a photoshoot here in Gilbert, Arizona.  If you have not followed this Project Car here, it is well equipped.  With our full Agency Power carbon fiber package including front lip, hood, rear trunk, rear diffuser, the V8 twin turbo sedan also features H&R lowering springs, SSR 3piece wheels, GruppeM cold air intake, and Velos ECU Flash.  Having tested both the Eisenmann and Meisterschaft exhaust systems, we thought we would sneak a pick of our new Agency Power full titanium catback exhaust for the M5.  In total, the full exhaust including mufflers, midpipes, etc weighs only 36.4lbs!  Check out all of our BMW F10 M5 Tuning Parts here and stay tuned for more installation and video updates!


Project BMW M5 F10 Photoshoot with Sneak Peak of Full Titanium Exhaust