Showing posts with label C7. Show all posts
Showing posts with label C7. Show all posts

Wednesday, May 4, 2016

Akrapovic Exhaust Systems for the Chevrolet Corvette C6 and C7

The Akrapovic company was founded in Slovenia a quarter century ago by former motorcycle racer Igor Akrapovic. Since then, the brand has grown to international prominence through its successful support of leading motorsport teams. One hundred world champions in both two- and four-wheel motorsports have achieved success using Akrapovic’s performance systems. Currently in stock are the Akrapovic exhaust systems for the Chevrolet Corvette C6 Z06/ZR1 and C7 Stingray/Z06 models.


Chevrolet Corvette C6 Z06/ZR1


The stainless-steel slip-on line systems for the Chevrolet C6 replace the stock exhaust from the center link pipes, back. The weight difference between the Akrapovic slip-on mufflers and the stock system is approximately 9lbs. Akrapovic’s slip-on line systems increase the power and torque of the Corvette V8 engine, while improving throttle response, all achieved without removing the catalytic converters. Finally, the most dramatic improvement is in the sound: the slip-on line exhaust gives the C6 a much deeper and throatier growl. The Akrapovic Sound Kit is also available as an option; it allows for full control of the dual-mode valves. Be sure to complete the look with a set of exquisite 115mm or larger 125mm tailpipes in either titanium or carbon fiber.


Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray


Chevrolet Corvette C7 Stingray/Z06


The Akrapovic evolution line system for the Chevrolet Corvette C7 takes exhaust tuning to the next level. Featuring mufflers and link-pipes made from high-grade titanium to dramatically reduce the overall weight, the system provides more power, lowers back pressure and increases torque. With four valves, the first pair operates in four-cylinder mode and the second set comes into action following the driver’s specifications. With an electronic device developed by Akrapovic engineers for the five standard GM modes—Weather, Eco, Tour, Sport and Track, the system is perfectly matched to operate with the car’s drive mode selector. This produces an even greater range of options for the driver to fully experience the amazing sound of the car.


The evolution line system, with a new X-pipe, provides even greater performance compared to the slip-on line system and adds a pure race-note soundtrack for this stunning engine with the enhanced sound characteristics of the V8 configuration without any drone – just pure enjoyment! Four large-diameter carbon fiber tail pipes with titanium inners complete the appearance of the evolution line perfectly, making it stand out as something special.


Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray


Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray


Akrapovic, exhaust system, Chevrolet, Corvette, C6, C7,, stingray



Akrapovic Exhaust Systems for the Chevrolet Corvette C6 and C7

Thursday, February 18, 2016

2016 Shark Grey Corvette C7 Z06 on MRR FS01 Wheels

The all-new MRR FS01 wheel is the first flow forged wheel series in their lineup. The FS01 is ultra-lightweight and comes in four standard sizes: 18-inch, 19-inch, 20-inch and 21-inch. Standard finishes include gloss black, gunmetal, matte black and liquid silver. Others colors are available at an additional cost.


Please give two weeks to build and powder coat when ordering. Check out Vivid Racing’s entire collection of MRR Wheels here.


Feast your eyes on the photos below of the 2016 Shark Grey Corvette C7 Z06 on a set of MRR FS01 gloss black flow forged wheels. This Stingray is sporting 19×10 in the front with 285/30/19 tires and 20×12 in the rear with 335/25/20 tires. The FS01 wheels fit perfectly over standard Z06 brakes.


2016 Shark Grey Corvette C7 Z06 on MRR FS01 Wheels


 



2016 Shark Grey Corvette C7 Z06 on MRR FS01 Wheels

2016 Shark Grey Corvette C7 Z06 on MRR FS01 Wheels

2016 Shark Grey Corvette C7 Z06 on MRR FS01 Wheels



2016 Shark Grey Corvette C7 Z06 on MRR FS01 Wheels

Wednesday, December 16, 2015

New C7 Corvette Harness Mounting Equipment Available from Brey-Krause

Brey-Krause has released their complete new line of products that will keep you safe and have your Chevrolet C7 Corvette ready to hit the track!  These new products consist of their Shoulder Harness Mount Bar, Lap-Belt Harness Mounts, Seat Track Adapter with Integrated Sub-Strap Mount, Stock Competition Seat Fire Extinguisher Mount and Quick Release Fire Bottle Mount. All of the Brey-Krause harness mounting equipment has been tested and certified in all possible mounting positions to handle the types of forces required by the National Highway Traffic Saftey Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Back Anchorages-Performance Requirements.


 


If you have any questions or need assistance ordering please call 1-866-448-4843


 


R-1125

Shoulder Harness Mount Bar


The Brey-Krause harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. These bars can be removed and installed with ease, and uses only the existing holes and mounting points. This harness mount bar allows for the use of the stock 3-point seat-belt when not in use.




Brey Krause C7 Corvette Harness Bar Brey Krause C7 Corvette Harness Bar Brey Krause C7 Corvette Harness Bar





R-9160



Lap-Belt Harness Mounts


Brey-Krause lap belts mount to the stock seat belt location and allow for the use of the stock seat belt. The R-9160 is also compatible with the R-9144 seat track adapter.





Brey-Krause lap harness mounts Brey-Krause lap harness mounts Brey-Krause lap harness mounts



 R-9144

Seat Track Adapter with Integrated Sub-Strap Mount


Brey-Krause offers an innovative solution for race seat mounting in the Corvette C7/Z06 Coupes. The R-9144 includes a complete assembly for simple installation and adjustment flexibility. Brey-Krause race seat side mounts and aftermarket sliders mount directly to this floor pan kit, placing the seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design allows for reuse of stock 3-point belts, and the unit provides inboard/outboard lap belt mounting locations. 



953a6a09-a62a-42a1-88ba-a239c16a90b3





R-2171

Stock Competition Seat Fire Extinguisher Mount




Brey Krause C7 Corvette Fire Extinguisher seat mount



R-9520 & R-9530

Quick Release Fire Bottle Mount



The Brey-Krause “Quick Release” Fire Extinguisher Mount is a precision, CNC machined, work of art – in addition to being a highly functional piece of equipment. It is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware.


Brey-Krause Fire Extinguisher Quick Release mount C7 Corvette Brey-Krause Fire Extinguisher Quick Release mount C7 Corvette Brey-Krause Fire Extinguisher Quick Release mount C7 Corvette

 



New C7 Corvette Harness Mounting Equipment Available from Brey-Krause

Monday, December 14, 2015

Magnuson Superchargers Horsepower Holiday Sale Happening Now!

The holiday season has arrived and nothing makes a better stocking stuffer than a supercharger from Mangnuson! Now until December 18th receive up to $500 off select superchargers for vehicles such as the Audi S4/S5, C7 Corvette, Camaro, Jeep, Toyota & more! Contact a Vivid Racing Sales Specialist today for pricing and more information 1-866-448-4843


Click here to shop all Magnuson Superchargers


magnuson-superchargersale Magnusonsupercharger


 



Magnuson Superchargers Horsepower Holiday Sale Happening Now!

Thursday, November 5, 2015

SEMA Show 2015 Live Coverage Highlights

The 2015 SEMA Show show is kicking off right now and that means thousands of aftermarket manufactures have gathered at the Convention Center in Las Vegas, Nevada to showcase their new products and have a great time! While we only started our journey yesterday evening, these photos don’t come close to show the amount of vehicles and products on display.


Check out the entire photo gallery from the show here.


 


 


SEMA Show Audi R8


Semaexport-79


Semaexport-78


Semaexport-67


Semaexport-64


Semaexport-60


Semaexport-58


Semaexport-55


Semaexport-52


Semaexport-43


Semaexport-38


Semaexport-27


Semaexport-25


Semaexport-21


Semaexport-16


Semaexport-15


Semaexport-6


Semaexport-1



SEMA Show 2015 Live Coverage Highlights