Vorsteiner Memorial Day Sale - $200 Off Flow Forged Wheels!

Vorsteiner is having a huge Memorial Day Sale where you can get $200 off any flow forged wheel set by using coupon code MEMVORT at checkout on Monday May 30. Special offer is for online orders only! Be sure to view our entire selection of Vorsteiner flow forged wheels here, or browse by category below.

These wheels are the latest in lightweight flow forged alloy technology, which brings quality performance wheels at a fraction of the pricing of forged wheels. They feature an exceptional strength to weight ratio with VIA & JWL safety certifications. Vorsteiner’s flow forged technology is on average 25% lighter compared to a conventional cast construction, yet substantially stronger.

Click on each wheel type below to visit our site and purchase directly from there. Don’t forget to enter the coupon code upon checkout.

Vorsteiner V-FF 105 1-Piece Wheels

Vorsteiner V-FF 101 1-Piece Wheels

Vorsteiner V-FF 102 1-Piece Wheels

Vorsteiner V-FF 103 1-Piece Wheels

Vorsteiner V-FF 104 1-Piece Wheels

Vorsteiner Memorial Day Sale - $200 Off Flow Forged Wheels!

Fidanza Releases their All-New Ford Focus ST Flywheel

Fidanza’s aluminum flywheels greatly increase the horsepower and engine life of your vehicle. They are lighter in weight than factory steel flywheels, and produce less stress on the crankshaft and bearings. Fidanza is recognized the world over as the premier choice for quality driveline parts. They are proud to announce their all-new Ford Focus ST flywheel, now available for purchase.

Having originated in 1998, the Ford Focus has spanned a number of motorsports events. The car has done it all from the Global Time Attack to watching Ken Block test drive the prototype 2016 Ford RD at the company’s facility in Cologne, Germany.

Made from only the highest quality 6061 T6 aluminum, this flywheel weighs in at around 9.5lbs. The lightened flywheel delivers faster throttle response, quicker acceleration and weight reduction. Be sure to check out all of Fidanza’s flywheels and products here. 

Year	Make	Model	Weight	Part#	MSRP
2016	Ford	Focus ST	9.5lbs	186121	$546.12

Fidanza Performance lightweight aluminum flywheels deliver:

• Faster throttle response and quicker acceleration


• Additional horsepower to the wheels (reduced parasitic losses)


• Smoother, faster shifting


• Easier braking, better slowing (due to reduced rotational mass)


• Reduced clutch wear and improved efficiency (from better heat dissipation)


• Cost savings and longevity (replaceable friction plate = infinitely re-buildable design)


• Potential for increased fuel economy (if you can keep your foot off the gas)


• Quality and reliability (Made in the USA from top grade materials)

 

Fidanza Releases their All-New Ford Focus ST Flywheel

Torque Solution Throttle Body Spacers for Volkwagen, Audi and Ford

Torque Solution throttle body spacers are designed to increase horsepower and torque. By creating more intake manifold volume along with a better air fuel mixture, you will make more power and obtain better fuel economy. CNC Machined from 6061 Billet Aluminum, Torque Solution can assure you the fit and finish is perfect. The spacer has two 1/8″ NPT Threaded Ports that can be used for vacuum, boost source, meth injection or nitrous. The spacer is also equipped with an o-ring gasket for a clean and easy install. You can browse Vivid Racing’s entire selection of Torque Solution throttle spacers here.

 

Torque Solution Throttle Body Spacer Applications: Ford Mustang GT 5.0L 2011-2016

– 19mm thick (3/4″)

– O-Ring gasket

– Includes install hardware (4 bolts and washers)

– Made from 6061-T6 Billet Aluminum

– 1/8″ NPT Threaded Port (2)

– 1/8″ NPT Plug (2)

– Red or Silver Anodized Finish

– Limited Lifetime Warranty

 

Torque Solution Throttle Body Spacer Applications: Ford Mustang GT 4.6L 2005-2010

– 19mm thick (3/4″)

– O-Ring gasket

– Includes install hardware (4 bolts and washers)

– Made from 6061-T6 Billet Aluminum

– 1/8″ NPT Threaded Port (2)

– 1/8″ NPT Plug (2)

– Black or Red Anodized Finish

– Limited Lifetime Warranty

 

Torque Solution Throttle Body Spacer Applications: Volkswagen / Audi 2.0T FSI TSI

– 6061-T6 Billet Aluminum

– 1/8″ NPT port

– Install in Minutes

– Includes Extended Bolts (4)

– Black Anodized Finish

– Limited Lifetime Warranty

 

Fits:

Audi TT MK2 2.0T FSI 2008-2015

Audi TTS MK2 2.0T FSI 2009-2015

Audi A5 B8 2.0T 2008-2012

Audi A5 B8.5 2.0T 2013+

Audi A4 B7 2.0T FSI FWD 05.5-2008

Audi A4 B7 2.0T FSI Quattro 05.5-2008

Audi A4 B8 2.0T FWD 2009-2012

Audi A4 B8 2.0T Quattro 2009-2012

Audi A4 B8.5 2.0T FWD 2013+

Audi A4 B8.5 2013+ 2.0T Quattro

Audi A3 8P 2.0 TSI 2005-2013

Audi A3 8P 2.0T FSI 2005-2013

VW Tiguan 2.0 TSI 2009-2011

VW Tiguan 2.0 TSI 2012+

VW Passat B6 2.0T FSI 2006-2011

VW Jetta MK5 2.0 TSI 05.5-2010

VW Jetta MK5 2.0T FSI 05.5-2010

VW Jetta MK6 Sedan 2.0 TSI2011+

VW Jetta MK6 Sedan 2.0 TSI Gen32011+

VW Jetta MK6 Sportwagen 2.0 TSI 2011+

VW Golf MK5 2.0 TSI 2006-2009

VW GTI MK5 2.0 TSI 2006-2009

VW Rabbit MK5 2.0 TSI 2006-2009

VW Golf MK5 2.0T FSI 2006-2009

VW GTI MK5 2.0T FSI 2006-2009

VW Golf MK5 2.0T FSI 2006-2009

VW Golf MK6 2.0T 2010-2014

VW GTI MK6 2.0T 2010-2014

VW Rabbit MK6 2.0T 2010-2014

VW EOS 2.0 TSI ALL

VW EOS 2.0T FSI ALL

VW CC 2.0 TSI 2009+

VW Golf R MK6 2.0T FSI 2012-2013

 

Torque Solution Throttle Body Spacers for Volkwagen, Audi and Ford

Rolloface Announces their ZR-1 3-Piece Aluminum Forged Wheels

Rolloface Performance is proud to announce their latest product, the RF ZR1 3-Piece Aluminum Forged Wheel. This wheel kit is researched and developed in-house with their 3 years of track experience, which means that it’s both fully functional and eye-catching. The wheels have fully customized width, offset and color options. They have been track-tested, and are lightweight, stable, and durable during high speeds. The ZR-1 3-piece wheels are manufactured right here in the U.S. and the MSRP is $7,200.

Scroll down to see the how the ZR-1 wheels look up-close. Be sure to also view all of Vivid Racing’s Rolloface Performance products.

 

Size

19-inche wheel

Width up to 14 inches

Customized offset

The Finish

Powder Coating Finish

Customized colors up to 3-tone

Optional

Titanium wheel bolts $590

Weight

i.e. 19 x 10.5 ET 0 weights 23 lbs, 19 x 12 ET -40 weights 27 lbs

Rolloface Announces their ZR-1 3-Piece Aluminum Forged Wheels

Torque Solution Billet Aluminum Engine Mounts for Mitsubishi

Torque Solution offers a full line of short shifters, shifter bushings, and exhaust and engine mounts that are all made in the U.S. Their extensive line of performance engine mounts are suitable for both street customers and race enthusiasts. 

The Mitsubishi Evolution X/Ralliart/Lancer platform is growing with higher horsepower cars. Torque Solutions took this as an opportunity to satisfy the need for a full billet aluminum engine mount kit. Their billet mounts are not only appealing to the eye, but also help add power to the ground minimizing drivetrain loss caused from using the soft OEM mounts.

Check out our selection of Torque Solution mounts and bushings here.

Engine Mounts for the 2008+ Mitsubishi Evolution X/Ralliart/Lancer

Torque Solution mounts are made of high-quality billet aluminum material machined to precise tolerances. The heart of the mounts are made from high-grade polyurethane material.

Engine Mount – TS-EX-100

– Eliminates wheel hop / traction loss

– Improved 60fts / e.t’s

– Made out of lightweight 6061-T6 billet aluminum

– Black anodized / Torque Solution laser engraved

– 75A durometer bushings

– Limited Lifetime Warranty

– Fits manual, SST and automatic transmission engines

Rear Engine Mount – TS-EX-200

– Eliminates wheel hop / traction loss

– Improved 60fts / e.t’s

– Made out of lightweight 6061-T6 billet aluminum

– Black anodized / Torque Solution laser engraved

– 75A durometer bushings

– Limited Lifetime Warranty

– Fits manual, SST and automatic transmission engines

Front Engine Mount – TS-EX-300

– Eliminates wheel hop / traction loss

– Improved 60fts / e.t’s

– Made out of lightweight 6061-T6 billet aluminum

– 600HP+ and 9sec e.t. torture tested

– Black anodized / Torque Solution laser engraved

– 75A durometer bushings

– Life Time Warranty

Transmission Mount – TS-EX-400

– Eliminates wheel hop / traction loss

– Improved 60fts / e.t’s

– Made out of lightweight 6061-T6 billet aluminum

– Black anodized / Torque Solution laser engraved

– 75A durometer bushings

– Limited Lifetime Warranty

– Fits manual, SST and automatic transmission engines

Roll Stop Mount Combo – TS-EX-23

Kit includes 2 mounts: Front and Rear

3-Piece Front Mount Kit – TS-EX-134

Kit includes 3 mounts: Front, Engine and Transmission

3-Piece Rear Mount Kit – TS-EX-124

Kit includes 3 mounts: Rear, Engine and Transmission

4-Piece Complete Mount Kit – TS-EX-1234

Kit includes all 4 mounts: Front, Rear, Engine and Transmission

Torque Solution Billet Aluminum Engine Mounts for Mitsubishi