What does a stock 2013 SRT Viper make for horsepower on the dyno? Well check out this video as we begin our newest Project Car here at Vivid Racing. Take a glamourous look at the new V10 snake ride as we light up the tires, slide sideways, then get her in the shop to go under the knife. Look for this venomous white Viper to debut at the 2013 SEMA show in Las Vegas with Seibon International.
Video by www.codygephart.com
One of our sales guys Dado (dado@vividracing.com ext. 236) brought his customer’s BMW F10 M5 to the Vivid Garage to get his Meisterschaft Oval Split Tip Exhaust with Vavletronic controls installed. The car is already outfitted with carbon fiber details and an awesome burnt orange color. The install process went perfect and the results were impressive to say the least. The oval tip lets the body of the car flow from one side to the other seamlessly. It adds that aggressive characteristic that all aftermarket aficionado desire. Time and time again we see great results from not only the Misterschaft exhaust itself but the Valvetronic system with the exhaust.
Check out these install pictures and sound clip video. Tell us what you think of the system in the comment section below or on Facebook, Twitter @vividracingcom or Instagram. You can see all the install pictures in the BMW Gallery.
Body kits and aerodynamic parts are some of the most sought after in the aftermarket world. The history of body kits have evolve over the years and today the body kit is more than aesthetics, there is purpose and function to most kits that are made today. Vorsteiner has capitalized on finding the flow of a car and accentuating what the car already does well. The M5 has been known as a luxury sedan for over 25 years. BMW has evolved the look to be more aggressive with every passing year. The F10 M5 is a perfect example of combining sex with power. The car isn’t too aggressive for a woman to drive but has just enough edge for a man to look dominant. Vorsteiner just released a new program for the F10 M5 and with this kit they have out-done all other kits.
The Vorsteiner BMW F10 M5 program includes:
• Carbon Fiber Pre-Preg Add-on Front Spoiler
• Carbon Fiber Pre-Preg Add-On Rear Diffuser
• Carbon Fiber Pre-Preg Add-On Boot Lid Spoiler
• 21 inch VS-190 Forged Monoblock Wheels
As always Vorsteiner always offer the highest quality in not only the design but the product itself. Each part is modeled using a 3D scanner for exact accuracy and perfect fit. Pre-production sections are wind tested and formed for minimum drag coefficient and maximum effective downforce, reducing lift at the front axle. Every individual segment is specifically formed to both enhance appearance and yet seamlessly mesh into the existing bodywork. The Vorsetiner F10 M5 aerodynamic solution package is available as a full kit or as separate components.
If you’re interested or have questions about this part, email sales@vividracing or hit us up on Facebook, Twitter, or Instagram. See more pictures of the kit in our Product Shots Gallery.
AEM has released its Infinity Plug & Play programmable ECU for the North American 2001-’06 BMW E46 M3 with manual transmission. Here is their press release and more information on this Infinity plug and play ECU.
The Infinity ECU for the E46 M3 includes an application-specific start-up calibration and connects to the E46 M3 via a Plug & Play harness that is sold separately. It is designed to fit in the factory location and AEM’s engineers were able to take advantage of the E46 M3’s sophisticated CAN bus system to incorporate several features directly into factory buttons on the steering wheel and console.
A Complete Stand Alone ECU
The Infinity ECU combines with the Plug & Play harness to replace the E46 M3’s factory ECU. It controls all of the engine functions including the VANOS variable cam control system and Drive by Wire (DBW) system.
Plug & Play Harness with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness (sold separately) includes dual Lambda ports, an AEMnet port for communication with other AEMnet enabled devices and an expansion port with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.
Map Switching
AEM incorporated the Infinity’s map switching capability into the factory steering wheel buttons, eliminating the need to wire in and mount an ancillary position switch. Using InfinityTuner software, users can now select from 8 modes for boost control maps, fuel maps, timing maps, Lambda target maps and more and select maps on the fly using the factory cruise UP (+) and DOWN (-) buttons.
To ensure that drivers know which mode they are in when not connected to the Infinity ECU, when the vehicle is keyed ON the tachometer moves to a specific RPM point to indicate which map the Infinity is using (for example 3k RPM indicates Mode 3, 4k RPM indicates mode 4, etc.). When the driver changes maps while driving, the tachometer will temporarily change from revs to the RPM point that indicates the switched mode for one second and then resume normal tachometer operation. Actual engine RPM will not be affected during this one second period.
Three-Step Rev Limiter
Users can configure the CRUISE ON/OFF (1/0) as a Temporary three step limiter switch through the InfinityTuner software (vehicle speed or time after launch dependent), and can set rev limits at specific rpm by points or set a flat limiter and use it as an RPM hold for launches.
Definable Rev Limit on Tachometer
The E46 M3’s tachometer incorporates an LED ring around the outer perimeter to suggest rev limits, and the Infinity ECU uses these LEDs to indicate user defined active rev limits. For instance, if the Coolant Protect feature in InfinityTuner is set with a rev limit to 5k RPM when the engine is cold, the rev limit is indicated via the lights around the perimeter of the tachometer until defined coolant temps for normal operation are achieved. Whatever rev limits a user configures will always be displayed, with the lowest defined rev limit value taking precedence in the LEDs surrounding the tachometer. This feature applies to any protect features, the three step limiter, etc.
Traction Control
The E46 M3 comes with wheel speed/ABS sensors from the factory, and the Infinity is able to use them for traction control via fuel cut, spark cut or retracting DBW throttle response. This eliminates the need to install additional sensors for traction control.
The CRUISE SET/HOLD (speedometer icon) can be configured as a traction control enable or disable button through the InfinityTuner software. Users can define a specific slip target for traction control in the software and turn it on or off using this button, or set two slip targets and use it for a mild and aggressive traction control strategy.
User Definable DBW Throttle Response
Using the Sport button near the shifter, users can define throttle curves in the InfinityTuner DBW software and take full control of throttle response. This allows users to change throttle response rate on the fly and is ideal for setting rain mode throttle curves.
Fits In Factory ECU Location
AEM’s engineers have designed the Infinity ECU and harness to fit in the factory ECU location to maintain overall weather resistance of the electronics and deliver a clean look in the engine compartment.
The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. Built around a latest-generation 200MHz automotive processor, the Infinity is capable of processing 400 MIPS (millions of instructions per second). All Infinity systems come fully enabled without the need for feature add-on purchases. Combined with AEM’s industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars.
The Infinity’s airflow-based tuning models simplify start up and speed up the tuning process by eliminating many of the lookup and trim tables (Correction Tables) necessary in previous generation ECUs.
Nisei Week is a celebration for Japanese Americans. It is described like this by the Nisei organization,
“The Nisei is a new American. Racially of the Orient, he is true and loyal citizen of the United States, his native land. Young, ambitious, hopeful, though at times oppressed, he seeks to take his place in civic development and community progress.â€
The Nisei car show has been hosted by various vendors for over a decade now. It is a display of the best of the best in the aftermarket and JDM industries. California is known to be a hub for aftermarket world. STANCENATION and SHOWOFF are hosting the 2013 Nisei Car Show and we’re going to be there in full force!
If you haven’t already, Join Our Facebook Event Page for a chance to win some cool prizes like,
Upload a picture of your car and show it off HERE. Upload pictures of past Nisei shows, or other events your car has done. We want to show of the best of the best that will be at Nisei this year. If you go to the show be sure to TAG US in all your Nisei photos at the show. You can TAG US on Instagram @vividracing, Facebook, or Twitter @vividracingcom.
