Customer"s Modded Honda Civic Type R with Weds Sport Wheels

Our customer, Robert M. from Jamaica, recently purchased a set of Weds Sport TC105N wheels (18×8.0 5×114.3 +42mm) in titanium finish for his Honda Civic Type R. The TC-105N wheel is Weds’ flagship racing wheel in the WedsSport series. This wheel has proven its worthiness in the motor sport racing community in Japan, the U.S. and Australia, by setting record after record. The TC-105N is quickly gaining a reputation as being one of the fastest mass produced wheels on the market. As an added bonus, it also has an excellent price and performance ratio.

The design of the Weds Sport TC105N wheel is derived directly from their Super GT-Racing program. The 10-spoke design with Weds innovative and exclusive “N-Frame” reinforced engineering makes it a lightweight, yet rigid and strong wheel. According to Weds, this can only be achieved by combinations of design, high quality material and our AMF (Advance Metal Forming) manufacturing process. Wide range of sizes and offset are available. Note that the TC-105N is designed to accommodate many big brake kits on the market.

Robert was kind enough to send in photos of the finished product with these wheels mounted on his car. Check out the pictures below, as well as his full mod list! You can also browse through our entire selection of Weds Sport wheels here.

Mod List: 

Toda Racing Header
Js Racing 70R Axle-Back
Skunk 2 Cold Air Intake
Hondata Fd2 FlashPro
Weds Sport TC105N Wheels in 18×8.0 5×114.3
225/40/R18 Nitto NT05’s Tires

Customer"s Modded Honda Civic Type R with Weds Sport Wheels

New aFe Power Mementum GT Intake System Released for the EcoBoost Ford Mustang!

aFe has released the all new Momentum GT intake system for 2015-2016 Ford Mustang EcoBoost with I4-2.3L turbo engine. The highly engineered intake system from aFe features a smooth one-piece housing that keeps out the unwanted engine heat while providing the engine with plenty of fresh cool air. Their unique filter-to-housing interface has enabled them to use the largest filter possible while maintaining a simple hassle-free installation. The intake tube was designed to create the largest cross section possible to achieve the maximum volumetric flow rate possible. This bolt on-on system requires no modification and includes all the necessary hardware to make installation painless!

The Momentum GT Intake System can be pre-ordered now and will be available in February, 2016

If you have questions or need assistance ordering please contact a Vivid Racing Sales Specialist today by calling 1-866-448-4843

Click here to shop all aFe Power products.

 51-73201		 aFe Momentum GT Pro DRY S Intake System Ford Mustang 15-16 Ecoboost	  $510.00  $448.00	Â
 54-73201		 aFe Momentum GT Pro 5 R Intake System Ford Mustang 15-16 Ecoboost	  $510.00  $448.00	Â

 

New aFe Power Mementum GT Intake System Released for the EcoBoost Ford Mustang!

aFe Power Shows Off New Products - See Video

aFe Power has been on a mission to own the exhaust and intake market which they further proved at SEMA 2015.  During this years convention, aFe brought out this Porsche 991 Carrera to show off their new cold air intake kit and exhaust system.  In addition, they also demonstrated their new BMW F80 M3 exhaust which operating valves.  The quality, fit, and function of aFe products is always amazing and even better, made in the USA.  The Porsche 991 cold air intake box is a beautiful plastic molded box with integrated cone filters to improve air flow and add much needed horsepower on the Carrera and Carrera S models.  Their exhausts feature new carbon fiber tips to rival European manufactures.  aFe continues to grow with their aFe Control line of suspension products as well.  Enjoy the SEMA videos and shop all aFe Products Here.

aFe Power Shows Off New Products - See Video

Agency Power Releases New BMW M5 F10 Carbon Intake

The BMW M5 and M6 V8 twin turbo is already a beast of a vehicle.  But what every turbocharged car needs is more air flow in, and more air flow out.  Well Agency Power has worked directly with the new V8 turbo BMW M5 F10 to develop several performance and styling products.  New for the F10 M5 and F12 M6 is this complete carbon fiber cold air intake kit.  The intake kit replaces the factory OEM air intake system completely.  Utilizing high flow aFe cone air filters, the kit has carbon fiber MAF tubes, carbon fiber heat shields, CNC machined filter adapters, and includes carbon fiber grill scoops.

The CNC machined filter adapters are 3D machined like a velocity stack to efficiently flow air as they are connected to the carbon MAF tubes.  The carbon fiber intake ducts sit behind the trademarked BMW kidney grills which help guide air flow into the intake system.  The pre oiled aFe filters feature the concave front end filter to gain the maximum amount of air flow possible.

As tested on a BMW M5 F10, the intake reduces turbo lag and improves throttle response.  Gaining performance throughout the power curve, the intake also gives your turbocharged engine a more audible tone.  All Agency Power products come with a limited lifetime warranty when you fill out the warranty card here.

Intake kit fits the F10/F12 BMW M5 M6.  Kit includes:

• 2 x Carbon Fiber MAF Tubes
• 2 x Carbon Fiber Heat Shields
• 2 x Carbon Fiber Intake Ducts
• 2 x CNC Machined intake to coupler adapters
• 2 x Silicone Couplers

Purchase a BMW Turbo Intake Here

Agency Power Releases New BMW M5 F10 Carbon Intake

Nissan 350Z Gen II Boosts Up Power from Injen

Nissan wanted to make a comeback to the sports car market after their giant success with the 300zx.  The 240sx was ok at the time, but nobody could predict its heavy drifting involvement today.  So they worked on the new Nissan 350Z.  This Z came out in 2 generations.  The first being the 03-06 and then the 07-08.  On the Gen 2 models, though they looked identical, there were some variances in the engine and performance.  One of the biggest one was the dual intake setup.  What becomes just about everyones first modification of a intake and exhaust was definitely done here.  So our customer equipped his 2007 Z with the Injen cold air intake kit.  Injen has been around a long long time making intakes, exhausts, intercoolers for different cars worldwide.  With their California based R&D department and manufacturing, they ensure each product makes justifiable horsepower and reliability.  This cold air intake is no different.  As you can see from the customers install pictures, it snakes around to be in the perfect spot for drawing in cooler air.  Cooler air to the engine means an increase in performance.  Check out the pictures below and some of the customers installation tips.  Shop all our Nissan 350Z Performance Parts here.

Installation Advice by customer:

1. The removal of the Strut Tower Bar should be done after releasing the pressure by loosening the outer large bolts on the drivers side of the Strut. Counting the turns of the center nut should be done so reinstallation can go smoothly. Reinstallation: Once the 4 nuts on the passenger and drivers side are tight ( always a good idea to mark where the bolts were), retention the center nut and then tighten the outer nuts so tension is maintained. If this is not done correctly, while cornering the strut tower will not perform its job.

2. An additional note should be made with the horns to say that the wiring should be placed in front of the horns and not behind where they could rub against the radiator.

3. Figure 31 shows the placement of the new horn bracket and reads: ” The assembled horns and bracket are now lowered behind the bumper area and attached to the drivers side stock location.” It should read the Passenger side stock location.

4. Figure 36: Installation of the Silicone Intake Hoses. There were no notes to include that on the passenger side there is a stock Oil Cooler. The passenger side Silicone Hose presses on those hoses leading to the oil cooler in front of the passenger side lower radiator. Luckily the hoses are protected, but with the usage of that extra space, you will not be able to get the left side bumper plastic fastener back in the supplied bracket… fig 20 and 38.

Overall a great install

 

Nissan 350Z Gen II Boosts Up Power from Injen