Prestige Motorsports in Puerto Rico Installs Macan Turbo Tuning Box

Our customer in Puerto Rico, Prestige Motorsports, recently installed the Porsche Macan 3.6L Turbo tuning box in one of his customers cars.  They have a lot of experience working with Porsche and our tuning boxes.  Most recently, they had a Porsche 991 Turbo with the tuning box set a Half Mile record here.  The plug and play tuning box is available for the Macan 3.0L, Panamera 3.0L, and Macan 3.6L.  On the Porsche Macan Turbo, the tuning box adds 92bhp on 93 octane and over 100 ft/lbs of torque!  Check out the installation photos and for those in Puerto Rico, contact Prestige Motorsports Here.

Order your Macan Tuning Box Here


Prestige Motorsports in Puerto Rico Installs Macan Turbo Tuning Box

How to Install the Porsche Macan Turbo 3.6L Tuning Box

One of our customers received his tuning box kit for the new Porsche Macan Turbo 3.6L and did a write up on the installation which he posted here on the MacanForums.  We thought we would share the installation for our readers as well.  This is one of the first available tuning options for the new Macan Turbo and it is well worth it delivery 90bhp and over 150nm of torque!  Check out the install by Jesse.  Order your VR Tuned Porsche Macan Turbo Tuning Box Here.

Original Post

Installed on my 2015 Macan Turbo. I’ve only logged about 50 miles to date…but the thing works exactly as advertised and the installation is a snap. I highly recommend it.

So I received the unit yesterday and almost immediately opened it up and installed this thing. There are good instructions on their website…but I thought the pictures left a little to be desired so here are my pictures that you can use with their instructions.

What’s in the box (tuner module, harness, instructions)

After you’ve shut the car down and locked it with the keys WAY far away.

Step 1 – Remove this guy. Pretty simple, just pull straight up.

What it should look like after remove cover.

So the installation essentially is as simple as unplugging a sensor, plugging it into the harness, and plugging the harness into the OEM location (three times) and then hooking up a power and ground.

Sensor 1 (looking for little red wire):

Sensor 2:

They do a great job marking the harness so you can’t screw up which sensor goes where.

Sensor 3:

For power and ground you’re using two factory locations as per the instructions. They’re very easy to get to. The ground is on the fire wall (with wrench on it) and the positive is under the little panel (my photo got messed up)

Now connect the module to harness:

Put the module somewhere safe and out of the way. I chose to use the strut tower as a nice easy place to mount it.

 

 

How to Install the Porsche Macan Turbo 3.6L Tuning Box