Voodoo13 New 370Z and G37 Front Upper Camber Caster Arms

Voodoo13 is now accepting pre-orders for their new dual adjustable front upper control arms for the Nissan 370Z and Infiniti G37. These caster control arms are made from CNC milled aerospace grade 6061 aluminum, sporting not only dual adjustment functionality, but also an innovative design. The slim upper spindle mount helps to prevent upper control arm slap from excessively lowered cars, while utilizing an encased spherical bearing design that prevents deformation from impact or high driving forces over time. The easy-to-reach dual adjusters allow for both caster and camber correction, all while never being unbolted from the car, to suite any application. Read below for more information regarding these arms, and check out all of our Voodoo13 products here.

Adjustment Range:  +/- 2 degrees relative to stock arm and depending on ride height. 4 degrees of caster adjustment is available separate from camber. The Voodoo13 test vehicle was equipped with coilover suspension and stock upper arms, and had -3.2 degrees camber. During testing, they achieved -5.2 and -.8 degrees after adjusting to the maximum settings.

Features:

• Offset spacers allow extra caster adjustment


• CNC Machined Aerospace Grade Aluminum


• Slim profile for extremely lowered vehicles


• Unique Design for aesthetics and 100% functionality


• Made in the USA QA1 spherical bearings and rod ends

Additional Information:

*Weight: 12 lbs

*Dimensions: 24 x 11 x 5 in

*Color: Raw, Hard OD Green, Hard Clear (Grey)

*Part Number: FCNS-0400

Installation Instructions:

09+ Nissan 370z Z34

07-08 Infiniti G35 V36 Sedan

08+ Infiniti G25/G37 V36 Sedan and Coupe

Voodoo13 New 370Z and G37 Front Upper Camber Caster Arms

Voodoo13 Rear Traction Rods for Nissan 350Z and Infiniti G35

Voodoo13 produces high-quality suspension parts that are developed on the racetracks and drift courses around the world using feedback from the top drivers and technical directors. Their rear traction rods are adjustable and replace the OE arms which use rubber brushings that wear out over time. This can adversely affect toe change under extreme acceleration and braking. The bump steer curve can be adjusted by simply changing the length of these traction rods.

Precision CNC machined adjusting rod from high strength 6061-T6 aluminum coated in MIL-A-8625 Type III Hard Anodize, CNC laser cut and bent steel brackets with TIG welded construction and stainless steel CNC’d spacers are used to ensure they will withstand abuse from street cars and track cars.

Voodoo13 uses QA1 XM Chromoly Steel heim joints that are heat treated for durability and strength. The spherical rod end is self-sealing and self-lubricated because of its Nylon/PTFE injection molded race that keeps out dirt and debris.

Fits: 

• 2003-2008 Nissan 350z


• 2003-2007 Infiniti G35 Coupe


• 2003-2006 Infiniti G35 Sedan

Color Options: Hard OD Green, Hard Clear (Grey)

Install Time: 1 Hour

Part Number: TRNS-0300HC, TRNS-0300HG

MSRP: $249.00

Take a glance at our entire selection of Voodoo13 products here.

 

Voodoo13 Rear Traction Rods for Nissan 350Z and Infiniti G35